Author Topic: LM3 input lead on the 6 wire harness.  (Read 6326 times)

KiloWhiskey

  • Engineer
  • ***
  • Posts: 61
  • Kevin W.
LM3 input lead on the 6 wire harness.
« on: February 01, 2019, 09:34:01 AM »
Are there uses for the input (white wire) on the LM3.     
I apologize if this was covered prior.
Kevin


In my defense, I was left unsupervised....

Alan

  • Conductor
  • ****
  • Posts: 1073
    • LK&O Railroad
Re: LM3 input lead on the 6 wire harness.
« Reply #1 on: February 01, 2019, 09:55:59 AM »
Are there uses for the input (white wire) on the LM3.     
I apologize if this was covered prior.

TBMK the white input wire is used only in the User Custom Accessory Projects within RailPro Assistant when feature enable is purchased.
Alan

LK&O Railroad website

When I was a kid... no wait, I still do that. HO, 28x32, double deck, 1969, RailPro

KiloWhiskey

  • Engineer
  • ***
  • Posts: 61
  • Kevin W.
Re: LM3 input lead on the 6 wire harness.
« Reply #2 on: February 01, 2019, 01:49:09 PM »
I read the info for the rp assistant,  and only saw references to the AM 1... does the rp assistant and  simulator need the USB transmitter to work? As it seemed to lock up on me. Ill advise on versions and such when i get home.
Kevin


In my defense, I was left unsupervised....

BruceRogers

  • Engineer
  • ***
  • Posts: 97
Re: LM3 input lead on the 6 wire harness.
« Reply #3 on: February 01, 2019, 03:18:14 PM »
When using the HC Simulator you will need to use the CI-1 to transfer files to, or operate any LM module. I have mine on a USB extension cable to keep it as close as possible to model I'm uploading files to.