Author Topic: LM-2S pins  (Read 9475 times)

Abiqua

  • Fireman
  • **
  • Posts: 8
LM-2S pins
« on: November 23, 2015, 06:09:09 PM »
I have found this information before but can't seem to find it now. The LM-2S sound end is a 6 pin plug.  How many pins on the operations end?  I am about to hardwire a DCC plug in a DC loco and want to us the correct plug (8, 9, or 21 pins). Thanks for you assistance.
Bob -- Cottage Grove, Oregon
SP&S and Oregon Shortlines

Alan

  • Conductor
  • ****
  • Posts: 1073
    • LK&O Railroad
Re: LM-2S pins
« Reply #1 on: November 23, 2015, 06:13:35 PM »
9 pins on the functions side. 6 pins on the sound side. Refer to last page of this document: http://www.ringengineering.com/RailPro/Documents/LM-2Instructions.pdf
I use generic version of the Digitrax 9 pin connector DHWH: http://www.digitrax.com/products/mobile-decoders/dhwh/
« Last Edit: November 23, 2015, 06:19:47 PM by Alan »
Alan

LK&O Railroad website

When I was a kid... no wait, I still do that. HO, 28x32, double deck, 1969, RailPro

Abiqua

  • Fireman
  • **
  • Posts: 8
Re: LM-2S pins
« Reply #2 on: November 24, 2015, 12:03:14 AM »
Thank you Alan. I looked and looked but could not find that info.
Bob -- Cottage Grove, Oregon
SP&S and Oregon Shortlines