Author Topic: Long trains and coupler problems  (Read 13321 times)

KB02

  • Engineer
  • ***
  • Posts: 86
Long trains and coupler problems
« on: March 02, 2022, 06:01:14 AM »
There's nothing like running long trains to weed out all your rolling stock that have couple problems.  ;D

After getting my fourth loco set up on RailPro, I MU'ed my fleet together and put the vast majority of my rolling stock behind it. Granted, when you're only talking 24 cars, it may not seem like much, but when you add in a 3% grade, you find out really quickly which cars have a couple that is mounted too high or too low or is, you know, plastic.  ;D ;D

Alan

  • Conductor
  • ****
  • Posts: 1073
    • LK&O Railroad
Re: Long trains and coupler problems
« Reply #1 on: March 02, 2022, 07:28:27 AM »
Been there, done that, did not enjoy it. Kadee enjoyed it. They sold more couplers that day.  ;D
Alan

LK&O Railroad website

When I was a kid... no wait, I still do that. HO, 28x32, double deck, 1969, RailPro

CPRail

  • Conductor
  • ****
  • Posts: 226
  • You know, sometimes I amaze even myself.
Re: Long trains and coupler problems
« Reply #2 on: March 02, 2022, 10:01:48 AM »
Back in the day when you had to pay attention to metal shank couplers in Athearn locos, I recall pulling the head right off of a Kadee #26 (metal head, plastic shank) on a heavy grade. First and only time I've pulled a "knuckle" in HO.

After that the new requirement was all-metal KDs in insulated boxes.
Ian Lisakowski
Modelling CP Rail & VIA in the early 80's