Author Topic: LM-3S in the wild  (Read 13171 times)

William Brillinger

  • Dispatcher (Admin)
  • Conductor
  • *****
  • Posts: 1342
    • Precision Design Co.
LM-3S in the wild
« on: June 30, 2016, 01:16:59 PM »
It has not been listed on the Ring Engineering site yet, but today I received my first stock of LM-3S modules.
http://pdc.ca/rr/catalog/product/railpro-and-accessories/51

I have very little detail about whats new about them other than that one of the input leads has been converted to a common lead and they have increased memory capacity. I believe they are otherwise functionally the same as the LM2. The pricing is also the same as the LM-2S.

Dimensions:
L 1.502" x W 0.700" x H 0.256"
or 38.12mm x 17.77mm x 6.53mm

LM-3S (1).JPG
LM-3S (3).JPG

- Bill Brillinger, RPUG Admin

Modeling the BNML in HO Scale, owner of Precision Design Co., and RailPro Dealer.


Alan

  • Conductor
  • ****
  • Posts: 1073
    • LK&O Railroad
Re: LM-3S in the wild
« Reply #1 on: June 30, 2016, 01:33:39 PM »
May want to inform Tim there is a misprint in the LED current statement. 120mA would make one very bright LED for a fraction of a second!
Alan

LK&O Railroad website

When I was a kid... no wait, I still do that. HO, 28x32, double deck, 1969, RailPro

William Brillinger

  • Dispatcher (Admin)
  • Conductor
  • *****
  • Posts: 1342
    • Precision Design Co.
Re: LM-3S in the wild
« Reply #2 on: June 30, 2016, 01:44:46 PM »
Quote
May want to inform Tim there is a misprint in the LED current statement. 120mA would make one very bright LED for a fraction of a second!

Oh, yup, I'll let him know!
- Bill Brillinger, RPUG Admin

Modeling the BNML in HO Scale, owner of Precision Design Co., and RailPro Dealer.


SD90

  • Fireman
  • **
  • Posts: 38
Re: LM-3S in the wild
« Reply #3 on: June 30, 2016, 05:09:22 PM »
How much memory is on the new LM-3S?

William Brillinger

  • Dispatcher (Admin)
  • Conductor
  • *****
  • Posts: 1342
    • Precision Design Co.
Re: LM-3S in the wild
« Reply #4 on: June 30, 2016, 05:44:45 PM »
Apparently the official announcement with all the details will come sometime next week.
« Last Edit: June 30, 2016, 05:55:57 PM by William Brillinger »
- Bill Brillinger, RPUG Admin

Modeling the BNML in HO Scale, owner of Precision Design Co., and RailPro Dealer.


William Brillinger

  • Dispatcher (Admin)
  • Conductor
  • *****
  • Posts: 1342
    • Precision Design Co.
Re: LM-3S in the wild
« Reply #5 on: July 13, 2016, 02:59:22 PM »
The LM-3 and LM-3S are now listed on Ring Engineering's website: http://ringengineering.com/LM-3S.htm

Here are the official details about these new units so far:

From Tim Ring:
  • The LM-3 and LM-3S have twice the program memory of a LM-2.
  • The LM-3S have twice the storage memory (for more sounds) of a LM-2S.
  • The LM-3 and LM-3S have a Negative pin in place of input 2. Therefore they have one input instead of two.  The Negative pin will allow better compatibility with keep alive and DCC.
  • The prices are the same as LM-2 and LM-2S.

Here is a link to the Instructions PDF from Ring: http://ringengineering.com/RailPro/Documents/LM-3Instructions.pdf

I have them in stock and ready to ship :)

- Bill Brillinger, RPUG Admin

Modeling the BNML in HO Scale, owner of Precision Design Co., and RailPro Dealer.


SD90

  • Fireman
  • **
  • Posts: 38
Re: LM-3S in the wild
« Reply #6 on: July 18, 2016, 02:58:35 AM »
I can't wait!