New RPT-1 Radio Repeater announced today!
I checked with Ring, and they confirm that the RPT-1 works with any HC.
RPT-1 works with all RailPro Products.
Your HC-2 and HC-2b need to be at Rev 2.52 or newer to use RPT-1. HC-3 needs to be at Rev 1.09 or newer.https://ringengineering.com/RPT-1.htmFrom Ring's website:
Add this low cost radio repeater to your RailPro Layout to add extended Radio Range and improved radio coverage! You can use multiple RPT-1 to extend the radio range of a RailPro Handheld Controller to hundreds of feet!
All Radios (including Bluetooth and WiFi) suffer from multipath distortion. This is where a radio wave can bounce off an object and come back and combine with the original signal in a way that it degrades the signal. This typically can cause small angles to have dead spots. By adding a RailPro Radio Repeater you can eliminate this radio problem completely.
[ You are not allowed to view attachments ]
[ You are not allowed to view attachments ]
Available for pre-order now on
PDC.CA, or from your favorite retailer.
Cheers!